Automatic Condensate Trap AD-SS

Part No.: 09K3000

Product features

  • Automatic condensate float trap
  • Safe condensate draining
  • Completely made of stainless steel
  • For high pressure and temperature applications

Product information & downloads

Data sheet
CE Certificate
Unit calculator

Barometric adjustment of the operating altitude of O₂ analyzers without pressure compensation

Enter the planned operating altitude in the field. Set the analyzer to the calculated O2 vol% value at 1013 mbar (altitude = 0 m) in air to measure at the planned operating altitude without barometric error.

Result: 22,9378 [vol%] need to be set to measure at the planned altitude without barometric error.*

*Air with standard pressure 1013 mbar = 20.93 vol% O₂

Pressure drop and delay time

Enter your values in fields 1 to 3.

1

2

3

Result: 3,39 Delay time approx. in [s]*

* Single change of gas, for 90 % response time approx. 3 changes of sample volume are required.

Calculation of the pressureless 100 % H₂O saturation

Enter the required H₂O dew point (°C).
The calculation only provides sufficiently accurate values in the temperature range between -20 °C and +90 °C.

Pressure units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Temperature units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Length units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Area units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Volume units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Weight units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Energy units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Flow rate

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Flow velocity

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Performance units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

  • Applications
    The M&C liquid drain AD-SS is used in gas conditioning systems where condensate must be drained after cooling the gas. For condensate pre-separation of saturated gas with simultaneous drainage, ADS-SS separators and automatic liquid drains are provided with a lateral gas connection for additional separator functions. The drain only works with overpressure.
  • Description
    Automatic condensate float trap type AD‑SS, condensate IN: 1/2" NPT f, condensate OUT: 1/2" NPT f, material: stainless steel 316
  • Product features
    Type Drain
    Explosion-proof No
    Material Stainless steel

Options & spare parts
Automatic Condensate Trap AD-SS

Here you get an overview of suitable options & spare parts

Product options

Options
Automatic Condensate Trap AD-SS

Configure the product in 4 steps

Was frequently viewed

Oblique view of Compressor Gas Cooler ECM-1

Compressor Gas Cooler ECM-1

02K7500X

  • Explosion-proof
    • No
  • Cooling
    • Compressor
  • Temperature
    • > 2 °C [> 28.4 °F]
  • Gas paths
    • 1
  • Flow rate/gas path
    • > 150 Nl/h
  • Material
    • Selectable
  • Power supply
    • 220‒240 V
Certifications
Oblique view of horizontal Universal Filter FSS-20SS-D

Universal Filter FSS-20SS-D

02F2705

  • Type
    • Universal
  • Housing material
    • Stainless steel
  • Filter material
    • Stainless steel
  • Condensate outlet
    • Yes
  • Power supply
    • Without
Oblique view of horizontal Liquid Stop LB-1/SS

Liquid Stop LB-1/SS

03F4000

  • Material
    • Stainless steel