Jacket Liquid Cooler LC-1S

Part No.: 04K2500

Product features

  • Liquid cooler with a cooling coil in a jacket tube
  • For liquid coolant
  • Completely out of stainless steel 316Ti
  • Maximum cooling capacity: approx. 1600 kJ/h
  • Length of the cooling coil: 6 m [≈ 19.7 ft]
  • With dial thermometer in the coolant inlet
  • For wall-mounting
  • Liquid medium connections: ø 6 mm OD
  • Coolant connections: female threaded G 3/8"
  • Material of sample-contacting parts: stainless steel
  • Optionally: different connection sizes

Product information & downloads

Data sheet
Unit calculator

Barometric adjustment of the operating altitude of O₂ analyzers without pressure compensation

Enter the planned operating altitude in the field. Set the analyzer to the calculated O2 vol% value at 1013 mbar (altitude = 0 m) in air to measure at the planned operating altitude without barometric error.

Result: 22,9378 [vol%] need to be set to measure at the planned altitude without barometric error.*

*Air with standard pressure 1013 mbar = 20.93 vol% O₂

Pressure drop and delay time

Enter your values in fields 1 to 3.

1

2

3

Result: 3,39 Delay time approx. in [s]*

* Single change of gas, for 90 % response time approx. 3 changes of sample volume are required.

Calculation of the pressureless 100 % H₂O saturation

Enter the required H₂O dew point (°C).
The calculation only provides sufficiently accurate values in the temperature range between -20 °C and +90 °C.

Pressure units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Temperature units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Length units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Area units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Volume units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Weight units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Energy units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Flow rate

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Flow velocity

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Performance units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

  • Overview

    Liquid cooler with coiled pipe in different versions, cooling capacity: 900 kJ/h or 1600 kJ/h

  • Applications
    The M&C gas and liquid coolers series LC/LGC are used in analytical technology to lower the dew point of humid gases or to lower the temperature of liquid media. The coolant is water for example. The counter-current principle used ensures optimum cooling effect.
  • Description
    Liquid cooler LC‑1S with a cooling coil made of DN 4/6 stainless steel tube, without separator chamber, with thermometer 0 to 60 °C, coolant: water, connections: cooling water G 3/8" f, tube DN 4/6, pressure: cooling water max. 10 bar, medium max. 50 bar, cooling capacity: 1600 kJ/h, material: SS 316 Ti
  • Product features
    Explosion-proof No
    Cooling Liquid
    Temperature Depending on media
    Gas paths 1
    Flow rate/gas path < 70 Nl/h
    Material Stainless steel
    Power supply Without

Options & spare parts
Jacket Liquid Cooler LC-1S

Here you get an overview of suitable options & spare parts

Product options
Spare parts

Spare parts
Jacket Liquid Cooler LC-1S

Options
Jacket Liquid Cooler LC-1S

Configure the product in 4 steps

Was frequently viewed

Frontal view of Gas Sample Probe SP2500-H and weather protective cover

Gas Sample Probe SP2500-H

20S3510

  • Explosion-proof
    • No
  • Heating
    • Yes
  • Temperature
    • 180 °C [356 °F]
  • Filter surface
    • Medium
  • Shutoff/blowback
    • No
  • Calibration
    • No
  • Portable
    • No
  • Power supply
    • 220‒240 V
  • Material
    • Stainless steel
Oblique view of Compressor Gas Cooler ECS-1SS

Compressor Gas Cooler ECS-1SS

02K2500

  • Explosion-proof
    • No
  • Cooling
    • Compressor
  • Temperature
    • > 2 °C [> 28.4 °F]
  • Gas paths
    • 1‒4
  • Flow rate/gas path
    • > 150 Nl/h
  • Material
    • Stainless steel
  • Power supply
    • 220‒240 V
Oblique view of Bellows Pump MP-F05

Bellows Pump MP-F05

05P1000

  • Type
    • Bellows
  • Explosion-proof
    • No
  • Heating
    • No
  • Flow rate
    • ≤ 300 Nl/h
  • Material
    • PTFE
  • Power supply
    • 220‒240 V