Sample Tube SP2000/HC

Part No.: 20S9090

Product features

  • Sample tube for higher sampling temperatures
  • For point-selective sampling
  • Sample tube can be used with an ATEX-certified gas sample probe
  • Male thread connection: G 3/4"
  • Length: 1 m [≈ 3.3 ft] without connection thread
  • Sampling temperature: max. +900 °C [+1652 °F]
  • Material of sample-contacting parts: Hastelloy®, Novapress®
  • Optionally: max. length of 2.5 m [≈ 8.2 ft] available

Product information & downloads

Manual
Data sheet
Unit calculator

Barometric adjustment of the operating altitude of O₂ analyzers without pressure compensation

Enter the planned operating altitude in the field. Set the analyzer to the calculated O2 vol% value at 1013 mbar (altitude = 0 m) in air to measure at the planned operating altitude without barometric error.

Result: 22,9378 [vol%] need to be set to measure at the planned altitude without barometric error.*

*Air with standard pressure 1013 mbar = 20.93 vol% O₂

Pressure drop and delay time

Enter your values in fields 1 to 3.

1

2

3

Result: 3,39 Delay time approx. in [s]*

* Single change of gas, for 90 % response time approx. 3 changes of sample volume are required.

Calculation of the pressureless 100 % H₂O saturation

Enter the required H₂O dew point (°C).
The calculation only provides sufficiently accurate values in the temperature range between -20 °C and +90 °C.

Pressure units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Temperature units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Length units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Area units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Volume units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Weight units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Energy units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Flow rate

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Flow velocity

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Performance units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

  • Overview
    Hastelloy, up to max. 900 °C; Hastelloy is a registered trademark of Haynes International Inc., USA
  • Applications
    The M&C sample tubes are used in combination with the M&C gas sample probes series SP for point-selective continuous gas sampling in processes with a low level of dust.
  • Description
    Sample tube type SP2000/HC, length: 1 m, connection: G 3/4" m, temperature: max. 900 °C, material: Hastelloy®C
  • Product features
    Material Hastelloy®
    Explosion-proof Yes
    Heating No
    Portable No
    Length 1000 mm [39.4"]
    Power supply Without

Options & spare parts
Sample Tube SP2000/HC

Here you get an overview of suitable options & spare parts

Product options
Spare parts

Spare parts
Sample Tube SP2000/HC

Options
Sample Tube SP2000/HC

Configure the product in 4 steps

Was frequently viewed

Oblique view of Gas Sample Probe SP2000-H and weather protective cover

Gas Sample Probe SP2000-H

20S2000

  • Explosion-proof
    • No
  • Heating
    • Yes
  • Temperature
    • 180 °C [356 °F]
  • Filter surface
    • Medium
  • Shutoff/blowback
    • No
  • Calibration
    • No
  • Portable
    • No
  • Power supply
    • 220‒240 V
  • Material
    • Stainless steel
Oblique view of Compressor Gas Cooler ECM-1

Compressor Gas Cooler ECM-1

02K7500X

  • Explosion-proof
    • No
  • Cooling
    • Compressor
  • Temperature
    • > 2 °C [> 28.4 °F]
  • Gas paths
    • 1
  • Flow rate/gas path
    • > 150 Nl/h
  • Material
    • Selectable
  • Power supply
    • 220‒240 V
Certifications
Oblique view of Bellows Pump MP-F05

Bellows Pump MP-F05

05P1000

  • Type
    • Bellows
  • Explosion-proof
    • No
  • Heating
    • No
  • Flow rate
    • ≤ 300 Nl/h
  • Material
    • PTFE
  • Power supply
    • 220‒240 V