Dilution Unit DIL-1

Part No.: 20S4900

Product features

  • Dilution unit for diluting sample gas
  • Installed on a mounting plate
  • With a dilution ratio of 30-40:1 as standard, optionally in the range from 10:1 to 500:1
  • 2 internal filters for sample and dilution gas are provided to protect the dilution section
  • With check valve for test gas
  • Material of sample-contacting parts: stainless steel, quartz glass, Viton®
  • Optionally: bypass injector DIL-1/B to shorten the response time during vacuum operation; second sample gas outlet 2 x AUS for undiluted sample gas; add-on set DIL-1/-A with 1 precision pressure controller and 2 vacuum pressure gauges; add-on set DIL-1/-A-FM with 2 ball valves, 1 precision pressure controller, 2 vacuum pressure gauges and 1 flow meter for test gas feeding; control panel DIL-1/-S with 1 pressure controller and 2 pressure gauges, 1 flow meter and 2 shut-off valves

Product information & downloads

Manual
Data sheet
Unit calculator

Barometric adjustment of the operating altitude of O₂ analyzers without pressure compensation

Enter the planned operating altitude in the field. Set the analyzer to the calculated O2 vol% value at 1013 mbar (altitude = 0 m) in air to measure at the planned operating altitude without barometric error.

Result: 22,9378 [vol%] need to be set to measure at the planned altitude without barometric error.*

*Air with standard pressure 1013 mbar = 20.93 vol% O₂

Pressure drop and delay time

Enter your values in fields 1 to 3.

1

2

3

Result: 3,39 Delay time approx. in [s]*

* Single change of gas, for 90 % response time approx. 3 changes of sample volume are required.

Calculation of the pressureless 100 % H₂O saturation

Enter the required H₂O dew point (°C).
The calculation only provides sufficiently accurate values in the temperature range between -20 °C and +90 °C.

Pressure units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Temperature units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Length units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Area units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Volume units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Weight units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Energy units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Flow rate

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Flow velocity

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Performance units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

  • Overview
    non-heated
  • Applications
    The non-heated M&C dilution unit DIL-1 is used in analytical technology to dilute the sample gas or components in the sample for example in the case of toxic gases, moisture measuring or emission measuring. The M&C dilution unit is based on the functional dilution technique which has proved itself in the M&C gas sample probe SP2000-H/DIL for years.
  • Description
    Dilution unit type DIL‑1, non‑heated, installed on a mounting plate, dilution ratio: 30‑40:1 (standard), consisting of: dilution section, 2 filters for sample gas and dilution gas, check valve for calibration gas
  • Product features
    Heating No
    Shutoff/blowback No

Options & spare parts
Dilution Unit DIL-1

Here you get an overview of suitable options & spare parts

Product options
Spare parts

Spare parts
Dilution Unit DIL-1

Options
Dilution Unit DIL-1

Configure the product in 4 steps

Was frequently viewed

Oblique view of Compressor Gas Cooler ECM-1

Compressor Gas Cooler ECM-1

02K7500X

  • Explosion-proof
    • No
  • Cooling
    • Compressor
  • Temperature
    • > 2 °C [> 28.4 °F]
  • Gas paths
    • 1
  • Flow rate/gas path
    • > 150 Nl/h
  • Material
    • Selectable
  • Power supply
    • 220‒240 V
Certifications
Oblique view of Universal Filter FT-2T, liquid alarm sensor LA1S and Electronic Controller LA1.1

Universal Filter FT-2T incl. LA1S + Electronic Controller LA1.1

02F4000

  • Type
    • Universal
  • Housing material
    • PTFE/glass
  • Filter material
    • PTFE
  • Condensate outlet
    • Yes
  • Power supply
    • 110‒120 V,
    • 220‒240 V