Humidifier Vessel FP-BF

Part No.: 03F5700

Product features

  • Humidifier vessel with gas bubbler
  • Optimum humidifying effect
  • Content: 70 ml
  • Connections: G 1/4" i
  • Low stagnant space
  • Wall-mounting
  • Material of sample-contacting parts: PVDF, glass, FKM

Product information & downloads

Data sheet
CE Certificate
Unit calculator

Barometric adjustment of the operating altitude of O₂ analyzers without pressure compensation

Enter the planned operating altitude in the field. Set the analyzer to the calculated O2 vol% value at 1013 mbar (altitude = 0 m) in air to measure at the planned operating altitude without barometric error.

Result: 22,9378 [vol%] need to be set to measure at the planned altitude without barometric error.*

*Air with standard pressure 1013 mbar = 20.93 vol% O₂

Pressure drop and delay time

Enter your values in fields 1 to 3.

1

2

3

Result: 3,39 Delay time approx. in [s]*

* Single change of gas, for 90 % response time approx. 3 changes of sample volume are required.

Calculation of the pressureless 100 % H₂O saturation

Enter the required H₂O dew point (°C).
The calculation only provides sufficiently accurate values in the temperature range between -20 °C and +90 °C.

Pressure units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Temperature units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Length units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Area units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Volume units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Weight units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Energy units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Flow rate

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Flow velocity

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Performance units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

  • Overview

    Humidfier with small dead volume to moisten the gas

  • Applications
    For the zero point calibration of analyzers that are water vapor cross-sensitive, the humidifier vessel FP-BF in front of the gas cooler is used to humidify the N2 zero gas in order to take water vapour cross-sensitive errors into account. Before entering the cooler, the zero gas passes the humidifier and leaves the cooler saturated at a stable dew point as well as the sample gas, e.g. at 5 ° C. Test gases with water-soluble components must not be passed via the humidifier.
  • Description
    Humidifier vessel type FP‑BF with bubbler F‑W, content: 70 ml, connection: G 1/4" f, material: PVDF, Viton®, glass
  • Product features
    Condensate outlet No
    Material PVDF/glass

Options & spare parts
Humidifier Vessel FP-BF

Here you get an overview of suitable options & spare parts

Product options
Spare parts

Spare parts
Humidifier Vessel FP-BF

Options
Humidifier Vessel FP-BF

Configure the product in 4 steps

Was frequently viewed

Oblique view of Peristaltic Pump SR25.3-W

Peristaltic Pump SR25.3-W

01P1320

  • Type
    • Pump
  • Explosion-proof
    • No
  • Flow rate
    • ≤ 300 ml/h
  • Material
    • Novoprene
Oblique view of Compressor Gas Cooler ECL/2

Compressor Gas Cooler ECL/2

02K4000X

  • Explosion-proof
    • No
  • Cooling
    • Compressor
  • Temperature
    • > 2 °C [> 28.4 °F]
  • Gas paths
    • 2
  • Flow rate/gas path
    • > 150 Nl/h
  • Material
    • Selectable
  • Power supply
    • 220‒240 V