Condensate Vessel TK13/LA5

Part No.: 09K4320

Product features

  • Condensate vessel with manual tap and LA5 float switch for liquid level monitoring
  • Connections: 2 x DN 4/6 for condensate inlet and ventilation
  • Capacity: approx. 10 liter
  • Including carrying handle
  • Highly corrosion-resistant
  • Material of sample-contacting parts: PE, rubber, PVDF

Product information & downloads

Data sheet
Unit calculator

Barometric adjustment of the operating altitude of O₂ analyzers without pressure compensation

Enter the planned operating altitude in the field. Set the analyzer to the calculated O2 vol% value at 1013 mbar (altitude = 0 m) in air to measure at the planned operating altitude without barometric error.

Result: 22,9378 [vol%] need to be set to measure at the planned altitude without barometric error.*

*Air with standard pressure 1013 mbar = 20.93 vol% O₂

Pressure drop and delay time

Enter your values in fields 1 to 3.

1

2

3

Result: 3,39 Delay time approx. in [s]*

* Single change of gas, for 90 % response time approx. 3 changes of sample volume are required.

Calculation of the pressureless 100 % H₂O saturation

Enter the required H₂O dew point (°C).
The calculation only provides sufficiently accurate values in the temperature range between -20 °C and +90 °C.

Pressure units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Temperature units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Length units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Area units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Volume units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Weight units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Energy units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Flow rate

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Flow velocity

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Performance units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

  • Applications
    The condensate collection vessels TG... / TK... are specially designed to meet the requirements of analytical technology and are used as condensate collection vessels where no automatic condensate disposal is possible or desired, as e.g. in the case of gas coolers, if e.g. only very small amounts of condensate accumulate. When using peristaltic pumps as automatic condensate removal and expecting an increased quantity of liquid ingress, the condensate collection vessel can also be used as a buffer vessel. For safe operation, the condensate vessels can be equipped with a liquid-level alarm.
  • Description
    Condensate vessel TK13/LA5 with manual tap and float switch for level monitoring, capacity: 10 liters, height: 310 mm, diameter: 235 mm, with 2 hose connections (4/6 mm) and carrying handle, material: PE, PVDF, PVC, rubber
  • Product features
    Type Collector
    Explosion-proof No
    Material PE

Options & spare parts
Condensate Vessel TK13/LA5

Here you get an overview of suitable options & spare parts

Product options

Options
Condensate Vessel TK13/LA5

Configure the product in 4 steps

Was frequently viewed

Oblique view of Peristaltic Pump SR25.2-W

Peristaltic Pump SR25.2-W

01P1307

  • Type
    • Pump
  • Explosion-proof
    • No
  • Flow rate
    • ≤ 300 ml/h
  • Material
    • Novoprene
Oblique view of Compressor Gas Cooler ECL/2

Compressor Gas Cooler ECL/2

02K4000X

  • Explosion-proof
    • No
  • Cooling
    • Compressor
  • Temperature
    • > 2 °C [> 28.4 °F]
  • Gas paths
    • 2
  • Flow rate/gas path
    • > 150 Nl/h
  • Material
    • Selectable
  • Power supply
    • 220‒240 V