Pre-Filter SP2000/V12-3/IC with Protective Tube

Part No.: 20S9550

Product features

  • Pre-filter with protection tube for gas sampling from processes with high dust levels
  • Protection tube with mounting flange made of Incoloy®
  • Double-layer structure for high back-purging efficiency
  • For dust loads > 10 g/m3
  • Mounting flange: DN 65 PN 6 B, with 4 welded-in threaded bolts
  • Length: 1000 mm [≈ 3.3 ft]
  • Filter porosity: 1 µm
  • Sampling temperature: max. +1000 °C [+1832 °F]
  • Material of sample-contacting parts: ceramic, Incoloy®, Novapress®
  • Optionally: volume displacer

Product information & downloads

Manual
Data sheet
Unit calculator

Barometric adjustment of the operating altitude of O₂ analyzers without pressure compensation

Enter the planned operating altitude in the field. Set the analyzer to the calculated O2 vol% value at 1013 mbar (altitude = 0 m) in air to measure at the planned operating altitude without barometric error.

Result: 22,9378 [vol%] need to be set to measure at the planned altitude without barometric error.*

*Air with standard pressure 1013 mbar = 20.93 vol% O₂

Pressure drop and delay time

Enter your values in fields 1 to 3.

1

2

3

Result: 3,39 Delay time approx. in [s]*

* Single change of gas, for 90 % response time approx. 3 changes of sample volume are required.

Calculation of the pressureless 100 % H₂O saturation

Enter the required H₂O dew point (°C).
The calculation only provides sufficiently accurate values in the temperature range between -20 °C and +90 °C.

Pressure units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Temperature units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Length units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Area units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Volume units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Weight units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Energy units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Flow rate

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Flow velocity

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Performance units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

  • Overview

    Ceramic pre-filter with Inconel protective tube, up to max. 1000 °C, in different versions, Inconel is a registered trademark of Special Metals Corporation USA

  • Applications
    The M&C pre-filters are used in combination with the M&C gas sample probes series SP for continuous gas sampling in processes with an increased level of dust.
  • Description
    Pre‑filter type V12‑3/IC for SP2000‑H, large in‑situ ceramic filter tube in double‑layer version for high blow‑back efficiency, without volume displacer, length: 1000 mm, 60 mm o.d., filter porosity: 1 µm, temperature: max. 1000 °C, mounting flange DN 100 PN 6B with 4 welded mounting screws, incl. gasket, material: Inconel®, SS 316, ceramic, incl. protection tube for pre‑filter V12‑3 with 3 longitudinal slots
  • Product features
    Material Ceramic
    Explosion-proof No
    Volume displacer No
    Length 1000 mm [39.4"]

Options & spare parts
Pre-Filter SP2000/V12-3/IC with Protective Tube

Here you get an overview of suitable options & spare parts

Product options
Spare parts

Spare parts
Pre-Filter SP2000/V12-3/IC with Protective Tube

Options
Pre-Filter SP2000/V12-3/IC with Protective Tube

Configure the product in 4 steps

Was frequently viewed

Frontal view of Gas Sample Probe SP2500-H/C/I/BB-F and weather protective cover

Gas Sample Probe SP2500-H/C/I/BB-F

20S3530A

  • Explosion-proof
    • No
  • Heating
    • Yes
  • Temperature
    • 180 °C [356 °F]
  • Filter surface
    • Medium
  • Shutoff/blowback
    • Yes
  • Calibration
    • Yes
  • Portable
    • No
  • Power supply
    • 110‒120 V
  • Material
    • Stainless steel
Oblique view of Compressor Gas Cooler ECM-1

Compressor Gas Cooler ECM-1

02K7500X

  • Explosion-proof
    • No
  • Cooling
    • Compressor
  • Temperature
    • > 2 °C [> 28.4 °F]
  • Gas paths
    • 1
  • Flow rate/gas path
    • > 150 Nl/h
  • Material
    • Selectable
  • Power supply
    • 220‒240 V
Certifications
Oblique view of Bellows Pump MP-F05

Bellows Pump MP-F05

05P1000

  • Type
    • Bellows
  • Explosion-proof
    • No
  • Heating
    • No
  • Flow rate
    • ≤ 300 Nl/h
  • Material
    • PTFE
  • Power supply
    • 220‒240 V