Gas Sample Probe SP2000

Part No.: 20S1000

Product features

  • Gas sample probe with filter housing and mounting flange made of stainless steel
  • With ceramic filter element, other filter materials are optional
  • Adaption to nearly all process conditions due to its compact and modular design
  • Easy installation and low maintenance
  • Low dead volume
  • Material of sample-contacting parts: stainless steel, FKM, Novapress®, ceramic
  • Basic version with a large variety of available options

Product information & downloads

Manual
Data sheet
Unit calculator

Barometric adjustment of the operating altitude of O₂ analyzers without pressure compensation

Enter the planned operating altitude in the field. Set the analyzer to the calculated O2 vol% value at 1013 mbar (altitude = 0 m) in air to measure at the planned operating altitude without barometric error.

Result: 22,9378 [vol%] need to be set to measure at the planned altitude without barometric error.*

*Air with standard pressure 1013 mbar = 20.93 vol% O₂

Pressure drop and delay time

Enter your values in fields 1 to 3.

1

2

3

Result: 3,39 Delay time approx. in [s]*

* Single change of gas, for 90 % response time approx. 3 changes of sample volume are required.

Calculation of the pressureless 100 % H₂O saturation

Enter the required H₂O dew point (°C).
The calculation only provides sufficiently accurate values in the temperature range between -20 °C and +90 °C.

Pressure units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Temperature units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Length units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Area units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Volume units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Weight units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Energy units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Flow rate

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Flow velocity

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Performance units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

  • Applications
    The SP2000... sample probes are used for continuous sampling of gases from dust-loaded, high-temperature or humid processes.
  • Description
    Gas sample probe type SP2000 with external ceramic filter type S‑2K150, filter porosity: 2 µm, filter element seal and cover seal out of Viton®, mounting flange: DN 65 PN 6B with G 3/4" f connection, material: SS 316Ti, Viton®, ceramic
  • Product features
    Explosion-proof No
    Heating No
    Filter surface Medium
    Shutoff/blowback No
    Calibration No
    Portable No
    Power supply Without
    Material Stainless steel

Options & spare parts
Gas Sample Probe SP2000

Here you get an overview of suitable options & spare parts

Product options
Spare parts

Spare parts
Gas Sample Probe SP2000

Options
Gas Sample Probe SP2000

Configure the product in 4 steps

Was frequently viewed

Oblique view of horizontal Sample Tube SP2000/SS and sealing ring made of PTFE

Sample Tube SP2000/SS

20S9065

  • Material
    • Stainless steel
  • Explosion-proof
    • Yes
  • Heating
    • No
  • Portable
    • No
  • Length
    • 1000 mm [39.4"]
  • Power supply
    • Without
Oblique view of Gas Sample Probe SP2200-H/C/I/BB-F and weather protective cover

Gas Sample Probe SP2200-H/C/I/BB-F

20S2015

  • Explosion-proof
    • No
  • Heating
    • Yes
  • Temperature
    • 180 °C [356 °F]
  • Filter surface
    • Medium
  • Shutoff/blowback
    • Yes
  • Calibration
    • Yes
  • Portable
    • No
  • Power supply
    • 220‒240 V
  • Material
    • Stainless steel
Oblique view of Compressor Gas Cooler ECM-1

Compressor Gas Cooler ECM-1

02K7500X

  • Explosion-proof
    • No
  • Cooling
    • Compressor
  • Temperature
    • > 2 °C [> 28.4 °F]
  • Gas paths
    • 1
  • Flow rate/gas path
    • > 150 Nl/h
  • Material
    • Selectable
  • Power supply
    • 220‒240 V
Certifications