Gas Sample Probe SP2100-H

Part No.: 10S1000

Product features

  • Gas sample probe with self-regulating heater
  • Including stainless steel sample tube in 1 m [≈ 3.3 ft] length, other sample tubes available
  • Filter housing and mounting flange can be heated up to max. 180 °C [356 °F]
  • With low-temperature alarm contact: < 160 °C [320 °F], NO
  • With ceramic filter element, other materials available
  • Small dead volume and fast response time
  • Easy installation and low maintenance
  • Power: 110–240 V
  • Material of sample-contacting parts: stainless steel, FKM, ceramic
  • Optionally: pre-filter, flange for test gas connection

Product information & downloads

Manual
Data sheet
CE Certificate
Unit calculator

Barometric adjustment of the operating altitude of O₂ analyzers without pressure compensation

Enter the planned operating altitude in the field. Set the analyzer to the calculated O2 vol% value at 1013 mbar (altitude = 0 m) in air to measure at the planned operating altitude without barometric error.

Result: 22,9378 [vol%] need to be set to measure at the planned altitude without barometric error.*

*Air with standard pressure 1013 mbar = 20.93 vol% O₂

Pressure drop and delay time

Enter your values in fields 1 to 3.

1

2

3

Result: 3,39 Delay time approx. in [s]*

* Single change of gas, for 90 % response time approx. 3 changes of sample volume are required.

Calculation of the pressureless 100 % H₂O saturation

Enter the required H₂O dew point (°C).
The calculation only provides sufficiently accurate values in the temperature range between -20 °C and +90 °C.

Pressure units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Temperature units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Length units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Area units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Volume units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Weight units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Energy units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Flow rate

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Flow velocity

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Performance units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

  • Applications
    The patented M&C gas sample probe version SP 2100-H is used for continuous gas sampling. The compact design requires only limited space. It is to be mounted in a weather-proof position.
  • Description
    Gas sample probe type SP2100‑H with external ceramic filter element type S‑2K150, filter porosity: 2 µm, electrical heating of the external filter to 180 °C with self‑regulating heating elements, low‑temperature alarm with potential‑free contact output responding at ‑20 °C below Tset, completely thermally insulated, power: 110‑240 V/50‑60 Hz, 200 W, mounting flange DN 65 PN 6B, with G 3/4" f connection, material: stainless steel, ceramic, Viton®, including 1 m sample tube out of SS 316Ti
  • Product features
    Explosion-proof No
    Heating Yes
    Temperature 180 °C [356 °F]
    Filter surface Medium
    Shutoff/blowback No
    Calibration No
    Portable No
    Power supply 110‒120 V 220‒240 V
    Material Stainless steel

Options & spare parts
Gas Sample Probe SP2100-H

Here you get an overview of suitable options & spare parts

Product options
Spare parts

Spare parts
Gas Sample Probe SP2100-H

Options
Gas Sample Probe SP2100-H

Configure the product in 4 steps

Was frequently viewed

Oblique view of Gas Sample Probe SP2000-H and weather protective cover

Gas Sample Probe SP2000-H

20S2000

  • Explosion-proof
    • No
  • Heating
    • Yes
  • Temperature
    • 180 °C [356 °F]
  • Filter surface
    • Medium
  • Shutoff/blowback
    • No
  • Calibration
    • No
  • Portable
    • No
  • Power supply
    • 220‒240 V
  • Material
    • Stainless steel
View of individual components Sample Tube SP30-H2

Sample Tube SP30-H2

02S9025P

  • Material
    • Stainless steel
  • Explosion-proof
    • No
  • Heating
    • Yes
  • Portable
    • No
  • Length
    • 1000 mm [39.4"]
  • Power supply
    • 110‒120 V,
    • 220‒240 V
Oblique view of Compressor Gas Cooler ECM-1

Compressor Gas Cooler ECM-1

02K7500X

  • Explosion-proof
    • No
  • Cooling
    • Compressor
  • Temperature
    • > 2 °C [> 28.4 °F]
  • Gas paths
    • 1
  • Flow rate/gas path
    • > 150 Nl/h
  • Material
    • Selectable
  • Power supply
    • 220‒240 V
Certifications