Compressor Gas Cooler ECM-EX2-1
Part No.: 02K7600X
Compressor gas cooler for 1 Jet-Stream heat exchanger with a gas flow rate of max. 250 Nl/h
Explosion-proof version according to ATEX for zone 2
Adjustable gas outlet dew point with a stability of < ±0.1 °C [±0.18 °F] at constant conditions
With a total cooling capacity of 144 kJ/h at +10 to 50 °C [+50 to 122 °F] ambient temperature
Ambient temperature up to +50 °C [+122 °F]
With configurable status alarm contact
Compact and lightweight wall-mounting housing
Power: 230 V
Optionally: 1 Jet-Stream heat exchanger, peristaltic pump SR25.2, different gas and condensate connections depending on heat exchanger type
For Ex zone 2, one or two gas path(s), max. flow 1 x 250 Nl/h or 2 x 150 Nl/h, different materials of heat exchangers, power: 230 V/50 Hz or 115 V/60 Hz - Without heat exchangers! Selection in Options.
The M&C gas coolers ECM are used in gas analysis technology to lower the dew point of humid gases in order to avoid condensation in the analyzer(s). By setting an extremely stable and low gas outlet dew point, water vapor cross-sensitivity and volumetric errors are avoided.
Compressor gas cooler type ECM‑Ex2‑1, ATEX certified version for hazardous zone 2 areas with the marking: II 3G Ex nA nC IIC T4 Gc BVS 16 ATEX E 055 X and according to CSA class I, DIV 2, Groups A, B, C, D, in wall‑mount enclosure, housing depth: 260 mm, prepared for 1 Jet‑Stream heat exchanger with 250 Nl/h, high and low‑temperature alarm window as well as sample gas outlet dew point adjustable at the integrated electronic controller, factory‑set to +5 °C, with 1 contact output, thermometer with digital display: ‑10/+50 °C, power: 230 V/50 Hz