Diaphragm Pump MP47-EX

Part No.: 02P1200

Product features

  • Analytical diaphragm pump
  • Explosion-proof version according to ATEX suitable for mounting in zone 1
  • Capacity: max. 6 Nl/min without pressure
  • Corrosion-resistant
  • 100 % lubricant-free
  • High level of gas tightness
  • Long service life
  • Power: 230 V
  • Material of sample-contacting parts: PTFE
  • Optionally: diaphragm break monitoring with double diaphragm system and flow sensor

Certifications

Product information & downloads

Manual
Data sheet
Unit calculator

Barometric adjustment of the operating altitude of O₂ analyzers without pressure compensation

Enter the planned operating altitude in the field. Set the analyzer to the calculated O2 vol% value at 1013 mbar (altitude = 0 m) in air to measure at the planned operating altitude without barometric error.

Result: 22,9378 [vol%] need to be set to measure at the planned altitude without barometric error.*

*Air with standard pressure 1013 mbar = 20.93 vol% O₂

Pressure drop and delay time

Enter your values in fields 1 to 3.

1

2

3

Result: 3,39 Delay time approx. in [s]*

* Single change of gas, for 90 % response time approx. 3 changes of sample volume are required.

Calculation of the pressureless 100 % H₂O saturation

Enter the required H₂O dew point (°C).
The calculation only provides sufficiently accurate values in the temperature range between -20 °C and +90 °C.

Pressure units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Temperature units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Length units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Area units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Volume units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Weight units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Energy units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Flow rate

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Flow velocity

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Performance units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

  • Overview

    Capacity: 6 Nl/min without pressure, power: 115 V/60 Hz or 230 V/50 Hz

  • Applications
    The diaphragm pumps type MP47... are suitable for corrosive gases. Their performance and design are specially geared to meet the requirements of analytical technology.
  • Description
    Analytical diaphragm pump type MP47/Ex, ATEX certified version for hazardous zone 1 with the marking: II 2 G EEx e,q II B T3, material: PTFE, capacity: 6 Nl/min. at atm. pressure, connections: G 1/4" f, power: 230 V/50 Hz, IP44
  • Product features
    Type Diaphragm
    Explosion-proof Yes
    Heating No
    Flow rate > 300 Nl/h
    Material PTFE
    Power supply 220‒240 V

Options & spare parts
Diaphragm Pump MP47-EX

Here you get an overview of suitable options & spare parts

Spare parts

Spare parts
Diaphragm Pump MP47-EX

Configure the product in 4 steps

Was frequently viewed

Oblique view of Bellows Pump MP-F10/EX

Bellows Pump MP-F10/EX

05P1105

  • Type
    • Bellows
  • Explosion-proof
    • Yes
  • Heating
    • No
  • Flow rate
    • > 300 Nl/h
  • Material
    • PTFE
  • Power supply
    • 220‒240 V
Certifications
Oblique view of Compressor Gas Cooler ECEX-1G

Compressor Gas Cooler ECEX-1G

02K5000A

  • Explosion-proof
    • Yes
  • Cooling
    • Compressor
  • Temperature
    • > 2 °C [> 28.4 °F]
  • Gas paths
    • 1‒4
  • Flow rate/gas path
    • > 150 Nl/h
  • Material
    • Glass
  • Power supply
    • 110‒120 V
Certifications
Oblique view of Liquid Alarm Sensor KS3 EX PTFE

Liquid Alarm Sensor KS3 EX PTFE

03E4250

Certifications