GL Elbow Adapter PV, GL25 - DN6/8

Part No.: 05V6030

Product features

  • GL elbow adapter for flexible tube, 2 pieces with GL expander ring
  • For operating pressures ≥ 1 bar to 5 bar
  • GL connection: for use with GL 25 nut and GL 25 - 10 mm sealing ring
  • Connection for flexible tube: DN 6/8
  • Corrosion-resistant
  • High level of gas tightness
  • Material of sample-contacting parts: PVDF

Product information & downloads

Data sheet
Unit calculator

Barometric adjustment of the operating altitude of O₂ analyzers without pressure compensation

Enter the planned operating altitude in the field. Set the analyzer to the calculated O2 vol% value at 1013 mbar (altitude = 0 m) in air to measure at the planned operating altitude without barometric error.

Result: 22,9378 [vol%] need to be set to measure at the planned altitude without barometric error.*

*Air with standard pressure 1013 mbar = 20.93 vol% O₂

Pressure drop and delay time

Enter your values in fields 1 to 3.

1

2

3

Result: 3,39 Delay time approx. in [s]*

* Single change of gas, for 90 % response time approx. 3 changes of sample volume are required.

Calculation of the pressureless 100 % H₂O saturation

Enter the required H₂O dew point (°C).
The calculation only provides sufficiently accurate values in the temperature range between -20 °C and +90 °C.

Pressure units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Temperature units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Length units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Area units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Volume units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Weight units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Energy units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Flow rate

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Flow velocity

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Performance units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

  • Applications
    M&C ‘’GL’’ glass connectors which are normally fitted with sealing rings may ONLY be used to connect RIGID tubes made of polyethylene or polypropylene etc. For FLEXIBLE tubes out of PVC, FPM or PTFE, a connecting adapter MUST be used. With high operating pressures (> 1 bar), connecting adapters for RIGID tubes MUST be used. When ordering connecting adapters for a NEW DEVICE, it is NOT NECESSARY to place a separate order for sealing rings and compression nuts, as the devices are designed to meet specific requirements.
  • Description
    Elbow connector/adapter, GL 25‑ DN 6/8, PV
  • Product features
    Type GL elbow adapter
    Material PVDF
    Connection GL14-25
    Heating No

Options & spare parts
GL Elbow Adapter PV, GL25 - DN6/8

Here you get an overview of suitable options & spare parts

Product options
Spare parts

Spare parts
GL Elbow Adapter PV, GL25 - DN6/8

Options
GL Elbow Adapter PV, GL25 - DN6/8

Configure the product in 4 steps

Was frequently viewed

Oblique view of Universal Filter FT-2T, liquid alarm sensor LA1S and Electronic Controller LA1.1

Universal Filter FT-2T incl. LA1S + Electronic Controller LA1.1

02F4000

  • Type
    • Universal
  • Housing material
    • PTFE/glass
  • Filter material
    • PTFE
  • Condensate outlet
    • Yes
  • Power supply
    • 110‒120 V,
    • 220‒240 V
Oblique view of Bellows Pump MP-F05

Bellows Pump MP-F05

05P1000

  • Type
    • Bellows
  • Explosion-proof
    • No
  • Heating
    • No
  • Flow rate
    • ≤ 300 Nl/h
  • Material
    • PTFE
  • Power supply
    • 220‒240 V
Oblique view of Peristaltic Pump SR25.2-W

Peristaltic Pump SR25.2-W

01P1307

  • Type
    • Pump
  • Explosion-proof
    • No
  • Flow rate
    • ≤ 300 ml/h
  • Material
    • Novoprene