Part No.: 04A0001

In-situ Laser Analyzer ILA1-B000-EX, Sulfur Oxide (SO₂)

Configure now

Request a quote

Certifications

• 

Product information & downloads

Unit calculator

Pressure units Temperature units Length units Area units Volume units Weight units Energy units Flow rate Flow velocity Pressure drop and delay time 100 % H₂O saturation Barometric adjustment of the operating altitude Performance units

Barometric adjustment of the operating altitude of O₂ analyzers without pressure compensation

Enter the planned operating altitude in the field. Set the analyzer to the calculated O2 vol% value at 1013 mbar (altitude = 0 m) in air to measure at the planned operating altitude without barometric error.

planned operating altitude above sea level in [m]

Result: 22,9378 [vol%] need to be set to measure at the planned altitude without barometric error.*

*Air with standard pressure 1013 mbar = 20.93 vol% O₂

Pressure drop and delay time

Enter your values in fields 1 to 3.

1 Hose/tube diameter in [mm]

2 Tube length in [m]

3 Flow rate in [Nl/h] Standard flow rate Nl/h
Volume flow under following
Defined conditions:

Temperature = 273.15 K (0 °C)
Pressure = 1,01325016 bar (760 mm HG)
Air density = 1,294 kg/m³ (dry air)

Result: 3,39 Delay time approx. in [s]*

* Single change of gas, for 90 % response time approx. 3 changes of sample volume are required.

Calculation of the pressureless 100 % H₂O saturation

Enter the required H₂O dew point (° C).
The calculation only provides sufficiently accurate values in the temperature range between -20 °C and +90 °C.

H₂O dew point [°C]

H₂O volume proportion [vol%]

H₂O weight proportion per standard cubic meter gas [g/Nm³] Standard flow rate Nl/h
Volume flow under following
Defined conditions:

Temperature = 273.15 K (0 °C)
Pressure = 1,01325016 bar (760 mm HG)
Air density = 1,294 kg/m³ (dry air)

Pressure units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

[at] technical atmosphere

[atm] physical atmosphere

[bar] bar

[kPa = kN/m²] kilopascal

[psi = lb/in²] psi

[ft H₂O] foot of water (4 °C)

[inch H₂O] inch of water (4 °C)

[inch Hg] inch of mercury (0 °C)

[Torr = mm Hg] mm of mercury (0 °C)

Temperature units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

[°C] °Celsius

[°F] °Fahrenheit

Length units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

[mm] millimeter

[cm] centimeter

[lb] meter

[km] kilometer

[mi] mile

[ft] foot

[in] inch

Area units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

[cm²] square centimeter

[m²] square meter

[km²] square kilometer

[mi²] square mile

[ft²] square foot

[in²] square inch

Volume units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

[cm³] cubic centimeter

[dm³] cubic decimeter

[m³] cubic meter

[in³] cubic inch

[ft³] cubic foot

[gal] US gallon

Weight units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

[g] gram

[kg] kilogram

[oz] ounce

[lb] pound

Energy units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

[J] joule = watt-second [Ws]

[kJ] kilojoule

[kWh] kilowatt-hour

[kcal_th] thermochemical kilocalorie

[Btu] British thermal unit

Flow rate

Enter a value to be converted in the corresponding field. All other fields will immediately show the converted value.

[m³/s] cubic meter per second

[l/s] liter per second

[l/min] liter per minute

[l/h] liter per hour

[m³/h] cubic meter per hour

[ft³/min] cubic foot per minute

Flow velocity

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

[m/s] meter per second

[km/h] kilometer per hour

[ft/s] foot per second

[mile/h] mile per hour

Performance units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

[kJ/h] kilojoule per hour

[W] watt

• Description

The ILA1‑B000‑EX In‑situ Laser Analyzer consists of a probe with an integrated measuring section. This comprises a transmitter, a reflector, a receiver, a connection flange and a sensor head. A separate HMI unit is also available as an option. The transmitter and receiver are located in the sensor head of the ILA1, while the beam reflector is fitted in the measuring section at the tip of the probe. A laser beam emanates from the sensor head and penetrates the process gas. The reflector at the end of the measuring section reflects the beam back to the receiver in the sensor head. An integrated system for continuous device flushing with nitrogen (N2) or compressed air prevents dust and other contaminants from coming into contact with the reflector and the other optical components.The laser measurement system has a modular design and can be configured for a wide variety of measurement tasks. Thanks to the choice of materials (e.g. stainless steels such as 904L, 321H or nickel‑based alloys) and the option of thermal decoupling, the system can be used both in corrosive gases and at very high temperatures (up to 900 °C [1652 °F]).Thanks to its measuring method, the ILA1 Laser Analyzer is very reliable and designed for short response times. It can be used for a variety of gases in industrial and chemical processes and does not require sampling and sample preparation. It therefore helps to minimize downtimes and increase process reliability at low operating costs.In summary, the ILA1‑X000‑EX is an optimal analyzer for real‑time measurements with very high precision, maximum reliability and minimum maintenance.

Configure the product in 4 steps

Configure your custom request in a few simple steps.