Oxygen Analyzer PMA30, analog/digital

Part No.: 03A2001

Product features

  • Heated O2 analyzer in compact housing
  • Housing takes up 1/3 of a 19" rack (28 HP)
  • SIL certification according to DIN EN 61508
  • Paramagnetic measuring principle
  • Remote measuring range control and indication
  • Flow alarm sensor downstream of the measuring cell
  • Analog and digital display
  • mA output: 4 to 20 mA
  • Small stagnant space, fast response time
  • Power: 230 V

Certifications

Product information & downloads

Unit calculator

Barometric adjustment of the operating altitude of O₂ analyzers without pressure compensation

Enter the planned operating altitude in the field. Set the analyzer to the calculated O2 vol% value at 1013 mbar (altitude = 0 m) in air to measure at the planned operating altitude without barometric error.

Result: 22,9378 [vol%] need to be set to measure at the planned altitude without barometric error.*

*Air with standard pressure 1013 mbar = 20.93 vol% O₂

Pressure drop and delay time

Enter your values in fields 1 to 3.

1

2

3

Result: 3,39 Delay time approx. in [s]*

* Single change of gas, for 90 % response time approx. 3 changes of sample volume are required.

Calculation of the pressureless 100 % H₂O saturation

Enter the required H₂O dew point (° C).
The calculation only provides sufficiently accurate values in the temperature range between -20 °C and +90 °C.

Pressure units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Temperature units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Length units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Area units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Volume units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Weight units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Energy units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Flow rate

Enter a value to be converted in the corresponding field. All other fields will immediately show the converted value.

Flow velocity

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Performance units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

  • Description
    Oxygen analyzer type PMA30A/D with combined analog/digital display in 1/3 of a 19" plug‑in rack (3 U, 28 HP), signal output: 4 to 20 mA (0 to 20mA on request) with galvanic isolation max. load of 300 Ohm (900 Ohm on request), measuring ranges: from 0 to 1/3/10/30/100 vol% O2, can be pre‑selected at the analyzer or externally, incl. flow meter with needle valve 7 to 70 Nl/h, status signal output for heating, fuse, projection LED and flow, thermostatization of the transducer to +50 °C, power: 230 V/50 Hz

Configure the product in 4 steps

Was frequently viewed

Gas Conditioning Unit CSS-VC2, TCU

01G6055

  • Portable
    • No
  • Cooling
    • Compressor
  • Gas paths
    • 2
  • Flow rate/gas path
    • < 150 Nl/h
  • Material
    • Selectable
  • Power supply
    • 220‒240 V

Gas Sample Probe SP2000-H

20S2000

  • Explosion-proof
    • No
  • Heating
    • Yes
  • Temperature
    • 180 °C [356 °F]
  • Filter surface
    • Medium
  • Shut off/blowback
    • No
  • Calibration
    • No
  • Portable
    • No
  • Power supply
    • 220‒240 V
  • Material
    • Stainless steel