Compressor Gas Cooler ECL/2

Part No.: 02K4000X

Product features

  • Compressor gas cooler for 2 Jet-Stream heat exchangers with a gas flow rate of max. 2 x 250 Nl/h or 1 x 500 Nl/h
  • Can be used as one or two-channel unit
  • Can be upgraded to a complete sample gas conditioning system
  • Adjustable gas outlet dew point with a stability of < ±0.25 °C [±0.45 °F] at constant conditions
  • With a total cooling capacity of 144 kJ/h at +10 to 50 °C [+50 to 122 °F] ambient temperature
  • Ambient temperature up to +45 °C [+113 °F]
  • With configurable status alarm contact
  • In a wall-mounting housing
  • Power: 230 V
  • Optionally: 2 Jet-Stream heat exchangers, peristaltic pumps SR25.2, different gas and condensate connections depending on heat exchanger types, pre-cooling stage(s), mounting plate, filter(s), liquid alarm sensor(s), diaphragm pump(s)

Product information & downloads

Unit calculator

Barometric adjustment of the operating altitude of O₂ analyzers without pressure compensation

Enter the planned operating altitude in the field. Set the analyzer to the calculated O2 vol% value at 1013 mbar (altitude = 0 m) in air to measure at the planned operating altitude without barometric error.

Result: 22,9378 [vol%] need to be set to measure at the planned altitude without barometric error.*

*Air with standard pressure 1013 mbar = 20.93 vol% O₂

Pressure drop and delay time

Enter your values in fields 1 to 3.

1

2

3

Result: 3,39 Delay time approx. in [s]*

* Single change of gas, for 90 % response time approx. 3 changes of sample volume are required.

Calculation of the pressureless 100 % H₂O saturation

Enter the required H₂O dew point (° C).
The calculation only provides sufficiently accurate values in the temperature range between -20 °C and +90 °C.

Pressure units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Temperature units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Length units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Area units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Volume units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Weight units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Energy units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Flow rate

Enter a value to be converted in the corresponding field. All other fields will immediately show the converted value.

Flow velocity

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Performance units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

  • Description
    Compressor gas cooler type EC‑L/2 in a wall‑mount enclosure, prepared for two heat exchangers 250 Nl/h each, high/low‑temperature alarm window, as well as sample gas dew point adjustable at the integrated electronic controller, factory‑set at +5 °C, with 1 contact output, temperature sensor with digital display: ‑10 °C/+50 °C, integrated evaluation for liquid alarm sensor LA1S, 1 contact output for status alarm, 1 contact output for pump control, power: 230 V/50 Hz

Configure the product in 4 steps