Gas Sample Dilution Probe SP2006-HG/H/DIL/BR/BB/BBF/2X, FS Coated

Part No.: 740-20S4424A-HG

Product information & downloads

Unit calculator

Barometric adjustment of the operating altitude of O₂ analyzers without pressure compensation

Enter the planned operating altitude in the field. Set the analyzer to the calculated O2 vol% value at 1013 mbar (altitude = 0 m) in air to measure at the planned operating altitude without barometric error.

Result: 22,9378 [vol%] need to be set to measure at the planned altitude without barometric error.*

*Air with standard pressure 1013 mbar = 20.93 vol% O₂

Pressure drop and delay time

Enter your values in fields 1 to 3.

1

2

3

Result: 3,39 Delay time approx. in [s]*

* Single change of gas, for 90 % response time approx. 3 changes of sample volume are required.

Calculation of the pressureless 100 % H₂O saturation

Enter the required H₂O dew point (° C).
The calculation only provides sufficiently accurate values in the temperature range between -20 °C and +90 °C.

Pressure units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Temperature units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Length units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Area units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Volume units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Weight units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Energy units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Flow rate

Enter a value to be converted in the corresponding field. All other fields will immediately show the converted value.

Flow velocity

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Performance units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

  • Description
    FS Coated Dilution probe w/3" 150# ANSI flange for mercury monitoring application. Features the following: Bypass eductor with vent back to process, undiluted sample outlet port (pressure comp. port). Dual Blowback ports (one behind filter element, one in front of filter element) with 24vdc high temp solenoid valves, 2 liter SS accumulator blowback air accumulator tank, Type K thermocouple for use with PID controller. All stainless steel sample wetted parts coated with fused silica coating for reduced Hg absorption. 2 micron Titanium Filter. NEMA 4X fiberglass housing. Dilution Ratio 30:1. 115V, 800 Watts Plug conduit holes.

Options & spare parts
Gas Sample Dilution Probe SP2006-HG/H/DIL/BR/BB/BBF/2X, FS Coated

Here you get an overview of suitable options & spare parts

Product options
Spare parts

Spare parts
Gas Sample Dilution Probe SP2006-HG/H/DIL/BR/BB/BBF/2X, FS Coated

Options
Gas Sample Dilution Probe SP2006-HG/H/DIL/BR/BB/BBF/2X, FS Coated

Configure the product in 4 steps