Bellows Pump MP-F05/R/EX

Part No.: 05P1110

Product features

  • Full PTFE bellows pump with bypass needle valve for adjusting the pump capacity
  • Explosion-proof version according to ATEX suitable for gases of zone 1 and for mounting in zone 1
  • Pump head can be rotated in 90° steps and connected to the gas line from the top or side
  • Max. capacity: approx. 5 Nl/min with a counter-pressure of ±50 mbar on the vacuum and pressure side
  • Max. operating pressure range: 0.4 to 2.5 bar abs.
  • Corrosion-resistant
  • 100 % lubricant-free
  • High level of gas tightness
  • Long service life
  • Power: 230 V/50 Hz, optionally 230 V/60 Hz
  • Material of sample-contacting parts: PTFE, PFA, FEP, PVDF
  • Optionally: upper part of the pump head made of stainless steel with bypass needle valve out of PVDF

Certifications

Product information & downloads

Unit calculator

Barometric adjustment of the operating altitude of O₂ analyzers without pressure compensation

Enter the planned operating altitude in the field. Set the analyzer to the calculated O2 vol% value at 1013 mbar (altitude = 0 m) in air to measure at the planned operating altitude without barometric error.

Result: 22,9378 [vol%] need to be set to measure at the planned altitude without barometric error.*

*Air with standard pressure 1013 mbar = 20.93 vol% O₂

Pressure drop and delay time

Enter your values in fields 1 to 3.

1

2

3

Result: 3,39 Delay time approx. in [s]*

* Single change of gas, for 90 % response time approx. 3 changes of sample volume are required.

Calculation of the pressureless 100 % H₂O saturation

Enter the required H₂O dew point (° C).
The calculation only provides sufficiently accurate values in the temperature range between -20 °C and +90 °C.

Pressure units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Temperature units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Length units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Area units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Volume units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Weight units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Energy units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Flow rate

Enter a value to be converted in the corresponding field. All other fields will immediately show the converted value.

Flow velocity

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Performance units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

  • Description
    Bellows sample pump with needle valve, type MP‑F 05/R/EX, material: PTFE, capacity: 320 Nl/h with a counter‑pressure of ‑/+ 50 mbar each on the vacuum and pressure side , connections: G 1/4" f, ATEX Ex marking EX II 2 G c IIC T3 X IBExU 15ATEX B 005 X, power: 230 V/50/60 Hz, IP54

Configure the product in 4 steps

Was frequently viewed

Gas Sample Probe SP2000-H

20S2000

  • Explosion-proof
    • No
  • Heating
    • Yes
  • Temperature
    • 180 °C [356 °F]
  • Filter surface
    • Medium
  • Shut off/blowback
    • No
  • Calibration
    • No
  • Portable
    • No
  • Power supply
    • 220‒240 V
  • Material
    • Stainless steel

Compressor Gas Cooler ECEX-1G

02K5000A

  • Explosion-proof
    • Yes
  • Cooling
    • Compressor
  • Temperature
    • > 2 °C [> 28.4 °F]
  • Gas paths
    • 1‒4
  • Flow rate/gas path
    • > 150 Nl/h
  • Material
    • Glass
  • Power supply
    • 110‒120 V
Certifications