Contact us

Choose your country:

Choose your region:

Your contact person:

Group Head Office Germany
phone: +49 2102 935 0
Fax: +49 2102 935-111
Send e-mail

Sample Gas Pumps

MP-F 10 EX

05P1105

capacity: 10 Nl/min (600 Nl/h) with a counter-

pressure of -/+ 50 mbar on the vaccuum and pressure side, power: 115 V/60 Hz or 230 V/50 Hz

Configure Product

The bellows pumps type MP-F 10...EX are suitable for mounting in Ex zone 1 IIC T3 areas and are appropriate for corrosive gases of Ex zone 1 IIC T3 areas. Their performance and construction are specially geared to meet the requirements of analytical technology.

Bellows sample pump, type MP-F10/EX, material: PTFE, capacity: 600 Nl/h with a counter-pressure on the vacuum and pressure side of -/+ 50 mbar each, connections: G 1/4" i, ATEX Ex marking EX II 2 G c IIC T3 X IBExU 15ATEX B 005 X, power: 230 V/50 Hz, IP54

Close X

Full-span setting for O₂ analysers

Enter the expected altitude of the site. You receive the full span in (Vol.-% O₂), calibration with air at 1013 mbar.

1

  • Result:
  • 22,9378
  • O₂ - span adjustment [Vol.-%]*

*Air with normal pressure 1013 mbar = 20,93 Vol.-% O₂.

Pressure drop and delay time

Please enter your data in fields 1 - 3.

1

2

3

  • Result:
  • 3,39
  • Delay time ca. in [s]*

* single change of gas, for 90%-response time approx. 3 changes of sample volume are required.

Calculation of pressureless 100% H₂O-saturation

Enter a value that you would like calculated. All other fields will show the converted value automatically.
The calculation provides only in the temperature range between -20°C and +90°C sufficiently accurate values.

Pressure units

Enter a value that you would like calculated. All other fields will show the converted value automatically.

Temperature units

Enter a value that you would like calculated. All other fields will show the converted value automatically.

Length units

Enter a value that you would like calculated. All other fields will show the converted value automatically.

Area units

Enter a value that you would like calculated. All other fields will show the converted value automatically.

Volume units

Enter a value that you would like calculated. All other fields will show the converted value automatically.

Weight units

Enter a value that you would like calculated. All other fields will show the converted value automatically.

Energy units

Enter a value that you would like calculated. All other fields will show the converted value automatically.

Flow rate

Enter a value that you would like calculated. All other fields will show the converted value automatically.

Flow speed

Enter a value that you would like calculated. All other fields will show the converted value automatically..

Here you can find more information.

  • Options for MP-F 10 EX
    • Mounting bracket for MP-F
      Mounting bracket for MP-F Item No.: 05P1050

      Mounting bracket for pump MP-F/MP-F Ex with 4 vibration dampers M6

    • MP-F XX, pump head SS 1/4" NPT, option
      MP-F XX, pump head SS 1/4" NPT, option Item No.: 05P1060

      Option: MP-F XX pump with stainless steel head, connections: 1/4 " NPT

    • MP-F XX, pump head SS with valve, option
      MP-F XX, pump head SS with valve, option Item No.: 05P1070

      Option: MP-F XX, pump head out of stainless steel with needle valve in PVDF, connections: 1/4" NPT

  • Spare parts for MP-F 10 EX
    • Bellows, PTFE, MP-F
      Bellows, PTFE, MP-F Item No.: 95P0010

      Bellows for pump type MP-F, material: PTFE

    • O-ring, FEP, 18x2, MP-F
      O-ring, FEP, 18x2, MP-F Item No.: 95P0035

      O-ring, FEP, 18 x 2 for bellows pump MP-F

    • MP47/MP-F, valve plate, PTFE
      MP47/MP-F, valve plate, PTFE Item No.: 90P1110

      Valve plate type T for MP47 and MP-F, 1 piece

Configure your product:

  • Step 1
  • Step 2
  • Step 3
  • Step 4
1. Step: Choose amount

pcs

Please choose amount!

This is a short description of the green highlighted term.
2. Step: Choose product options
  • Your amount MP-F 10 EX (05P1105): pcs
  • Your options:

    Options for MP-F 10 EX

    • Mounting bracket for MP-F
      Mounting bracket for MP-F Item No.: 05P1050

      Mounting bracket for pump MP-F/MP-F Ex with 4 vibration dampers M6

      Add
      This is a short description of the green highlighted term.
    • MP-F XX, pump head SS 1/4" NPT, option
      MP-F XX, pump head SS 1/4" NPT, option Item No.: 05P1060

      Option: MP-F XX pump with stainless steel head, connections: 1/4 " NPT

      Add
      This is a short description of the green highlighted term.
    • MP-F XX, pump head SS with valve, option
      MP-F XX, pump head SS with valve, option Item No.: 05P1070

      Option: MP-F XX, pump head out of stainless steel with needle valve in PVDF, connections: 1/4" NPT

      Add
      This is a short description of the green highlighted term.
    3. Step: Choose parts
    • Your amount MP-F 10 EX (05P1105): pcs
    • Your options:
      • Your spare parts:

        Spare parts for MP-F 10 EX

        • Bellows, PTFE, MP-F
          Bellows, PTFE, MP-F Item No.: 95P0010

          Bellows for pump type MP-F, material: PTFE

          Add
          This is a short description of the green highlighted term.
        • O-ring, FEP, 18x2, MP-F
          O-ring, FEP, 18x2, MP-F Item No.: 95P0035

          O-ring, FEP, 18 x 2 for bellows pump MP-F

          Add
          This is a short description of the green highlighted term.
        • MP47/MP-F, valve plate, PTFE
          MP47/MP-F, valve plate, PTFE Item No.: 90P1110

          Valve plate type T for MP47 and MP-F, 1 piece

          Add
          This is a short description of the green highlighted term.
        4. Step: Add to request
        • Your amount MP-F 10 EX (05P1105): pcs
        • Your options:
          • Your spare parts:
            Item added

            Item added successful.

            Close