Compressor Gas Cooler ECM-1

Part No.: 02K7500X

Product features

  • Compressor gas cooler for 1 Jet-Stream heat exchanger with a gas flow rate of max. 250 Nl/h
  • Adjustable gas outlet dew point with a stability of < ±0.1 °C [±0.18 °F] at constant conditions
  • With a total cooling capacity of 144 kJ/h at +10 to 50 °C [+50 to 122 °F] ambient temperature
  • Ambient temperature up to +50 °C [+122 °F]
  • With configurable status alarm contact
  • Compact and lightweight wall-mounting housing
  • Power: 230 V
  • Optionally: 1 Jet-Stream heat exchanger, peristaltic pump SR25.2, different gas and condensate connections depending on heat exchanger type

Certifications

Product information & downloads

Manual
Data sheet
CE Certificate
Unit calculator

Barometric adjustment of the operating altitude of O₂ analyzers without pressure compensation

Enter the planned operating altitude in the field. Set the analyzer to the calculated O2 vol% value at 1013 mbar (altitude = 0 m) in air to measure at the planned operating altitude without barometric error.

Result: 22,9378 [vol%] need to be set to measure at the planned altitude without barometric error.*

*Air with standard pressure 1013 mbar = 20.93 vol% O₂

Pressure drop and delay time

Enter your values in fields 1 to 3.

1

2

3

Result: 3,39 Delay time approx. in [s]*

* Single change of gas, for 90 % response time approx. 3 changes of sample volume are required.

Calculation of the pressureless 100 % H₂O saturation

Enter the required H₂O dew point (°C).
The calculation only provides sufficiently accurate values in the temperature range between -20 °C and +90 °C.

Pressure units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Temperature units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Length units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Area units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Volume units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Weight units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Energy units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Flow rate

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Flow velocity

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Performance units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

  • Overview

    One or two gas paths, max. flow: 1 x 250 Nl/h or 2 x 150 Nl/h, different materials of heat exchangers, power: 230 V/50 Hz or 115 V/60 Hz - Without heat exchangers! Selection in Options" -"

  • Applications
    The M&C gas coolers ECM are used in gas analysis technology to lower the dew point of humid gas in order to prevent condensation in the analyzer(s). An extremely stable and low gas outlet dew point minimizes water vapor cross-sensitivity and volumetric errors.
  • Description
    Compressor gas cooler type ECM‑1 in wall‑mount enclosure, housing depth: 260 mm, prepared for 1 jet‑stream heat exchanger with 250 Nl/h, high and low‑temperature alarm window as well as sample gas outlet dew point adjustable via the integrated electronic controller, factory‑set to +5 °C, with 1 contact output, thermometer with digital display: ‑10/+50 °C, power: 230 V/50 Hz, CSA US
  • Product features
    Explosion-proof No
    Cooling Compressor
    Temperature > 2 °C [> 28.4 °F]
    Gas paths 1
    Flow rate/gas path > 150 Nl/h
    Material Selectable
    Power supply 220‒240 V

Options & spare parts
Compressor Gas Cooler ECM-1

Here you get an overview of suitable options & spare parts

Product options
Spare parts

Spare parts
Compressor Gas Cooler ECM-1

ECM-1/ECP3000(C)/ECC-1 G, HE
Part No.: 93K0140

Jet‑stream heat exchanger for cooler type ECP3000/ECP3000C/ECM‑1/ECC‑1, material: Duran® glass, connections: sample gas: GL 18‑6 mm, condensate GL 25‑12 mm

ECM-1/ECP3000(C)/ECC-1 PV, heat exchanger
Part No.: 93K0170

Jet‑stream heat exchanger for cooler type ECP3000/ECP3000C/ECM‑1/ECC‑1, material: PVDF, connections: sample gas: G 1/4" i, condensate G 3/8" i

ECM-1/ECP3000(C)/ECC-1 SS, heat exchanger
Part No.: 93K0160

Jet‑stream heat exchanger for cooler type ECP3000/ECP3000C/ECM‑1/ECC‑1/SCC‑1, material: SS 316Ti, connections: sample gas G 1/4" i, condensate G 3/8" i

ECP3000G/ECM-1G, heat exchanger, 90°
Part No.: 93K0150

Jet‑stream heat exchanger for cooler type ECP3000/ECM‑1/ECC‑1, 90°, material: Duran® glass, connections: sample gas GL 18‑6/6 mm, condensate: GL 18‑8 mm

ECM-2/ECP(1/2)000C G, heat exchanger
Part No.: 97K0100

Jet‑stream heat exchanger type ECM‑2G, ECP1000C, ECP2000C, material: Duran® glass, connections: sample gas GL18‑6/6 mm, condensate GL 25‑12 mm

ECM-2/ECP(1/2)000C PV, heat exchanger
Part No.: 97K0110

Jet‑stream heat exchanger type ECM‑2, ECP1000C, ECP2000C material: PVDF, connections: sample gas 6 mm, condensate G 3/8" i

ECM-2/ECP(1/2)000C SS, HE
Part No.: 97K0115

Jet‑stream heat exchanger type ECM‑2, ECP1000C, ECP2000C SS, material: SS 316Ti, connections: sample gas: 6 mm, condensate G 3/8" i

Thermal conductivity paste, 5 g
Part No.: 90K0114

Thermal conductivity paste, ‑20 to +100 °C, silicone‑free, 5 g

Thermal conductivity paste, 50 g
Part No.: 90K0115

Thermal conductivity paste, ‑20 to +100 °C, silicone‑free, 50 g

Fan ECP1/EC-FD/ECM, 230 V
Part No.: 90K0035

ECP‑1, EC‑FD fan 230 V, 50 Hz

Transformer ECM SCC-C, 230 VA
Part No.: 97K0010

Transformator ECM 115/230 V, 230 VA

SR25 tube set, connection DN4/6
Part No.: 90P1007

Tube set for peristaltic pump SR25 with PVDF tube connection DN 4/6

SR25, contact spring set (4 pcs.)
Part No.: 90P1010

1 set of contact springs for driver of peristaltic pump SR25 (set = 4 pcs.)

SR25, driver, complete
Part No.: 90P1020

Driver, complete, for peristaltic pump SR25

SR25 contact pulley
Part No.: 90P1045

Contact pulley (1 pc.) for peristaltic pump SR25., (2 pcs./pump required).

SR25, conveying belt
Part No.: 90P1050

Conveying belt for peristaltic pump SR25

Peristaltic Pump SR25.2
Part No.: 01P1300

Product features

  • Peristaltic pump for front-panel mounting
  • Reliable condensate removal
  • Self-priming: pump creates a suction force to draw liquid upwards
  • With return stop
  • Rotational speed: 5 rpm
  • Flow rate: 0.3 l/h liquid
  • Material of sample-contacting parts: Novoprene (Masterflex®/Chemsure® optional), PVDF

SR25 S-bolt
Part No.: 90P1025

S‑bolt for peristaltic pump SR25

SR25.2 pump head without tube set
Part No.: 90P1031

Pump head complete for peristaltic pump SR25.2, without tube set, motor and gear

SR25.2 Motor with gear, complete
Part No.: 90P1036

Spare Motor with gear for SR 25.2. 230/115 V, 50/60 Hz

Sealing ring, GL 18- 6 mm
Part No.: 91F1010

Sealing ring, GL18‑6 mm, material: PTFE

Sealing ring GL18-8 mm
Part No.: 91F1015

Sealing ring GL18‑8 mm, material: PTFE

Sealing ring GL 25-12 mm
Part No.: 90F0025

Sealing ring GL 25‑12 mm, material: PTFE

Spare union nut GL 18
Part No.: 91F1005

Spare union nut GL18

Spare union nut GL 18/14
Part No.: 91F1007

Spare union nut GL 18/14

Union nut GL 25
Part No.: 90F0020

Union nut GL 25

Union nut GL 25/18
Part No.: 90F0022

Union nut GL 25/18

Temperature controller Jumo i Tron ECM
Part No.: 01B8360

Electron. PID temperature controller type type 702040, with self‑optimization in front‑panel housing, standard control ranges: PT100, 0‑200 °C, Fe‑CuNi 0‑400/0‑800 °C, controlling output: 0‑5 V to solid state relais, status signal output: 1 contact NO for over‑ and undertemperature alarm, alarm relay switching capacity: 250 V AC, 3 A, power: 230/115 V 50/60 Hz

Compressor Klixon, 230 V ECM
Part No.: 97K0230

Compressor thermoswitch Klixon® 230 V, ECM type LYDN96X

Options
Compressor Gas Cooler ECM-1

ECM-1/ECP3000(C)/ECC-1 G, HE
Part No.: 93K0140

Jet‑stream heat exchanger for cooler type ECP3000/ECP3000C/ECM‑1/ECC‑1, material: Duran® glass, connections: sample gas: GL 18‑6 mm, condensate GL 25‑12 mm

ECM-1/ECP3000(C)/ECC-1 PV, heat exchanger
Part No.: 93K0170

Jet‑stream heat exchanger for cooler type ECP3000/ECP3000C/ECM‑1/ECC‑1, material: PVDF, connections: sample gas: G 1/4" i, condensate G 3/8" i

ECM-1/ECP3000(C)/ECC-1 SS, heat exchanger
Part No.: 93K0160

Jet‑stream heat exchanger for cooler type ECP3000/ECP3000C/ECM‑1/ECC‑1/SCC‑1, material: SS 316Ti, connections: sample gas G 1/4" i, condensate G 3/8" i

ECM-1/ECP3000(C)/ECC-1 SS NPT, HE
Part No.: 93K0160N

Jet‑stream heat exchanger for cooler type ECP3000/ECP3000C/ECM‑1/ECC‑1, material: SS 316.Ti, connections: sample gas 1/4" NPT, condensate 3/8" NPT

ECP3000G/ECM-1G, heat exchanger, 90°
Part No.: 93K0150

Jet‑stream heat exchanger for cooler type ECP3000/ECM‑1/ECC‑1, 90°, material: Duran® glass, connections: sample gas GL 18‑6/6 mm, condensate: GL 18‑8 mm

ECM-2/ECP(1/2)000C G, heat exchanger
Part No.: 97K0100

Jet‑stream heat exchanger type ECM‑2G, ECP1000C, ECP2000C, material: Duran® glass, connections: sample gas GL18‑6/6 mm, condensate GL 25‑12 mm

ECM-2/ECP(1/2)000C PV, heat exchanger
Part No.: 97K0110

Jet‑stream heat exchanger type ECM‑2, ECP1000C, ECP2000C material: PVDF, connections: sample gas 6 mm, condensate G 3/8" i

ECM-2/ECP(1/2)000C SS, HE
Part No.: 97K0115

Jet‑stream heat exchanger type ECM‑2, ECP1000C, ECP2000C SS, material: SS 316Ti, connections: sample gas: 6 mm, condensate G 3/8" i

SR25 front mounting ECM/SCC, option
Part No.: 01P9125

Option: peristaltic pump type SR25.2, installed in the front of the cooler ECM, peristaltic pump head accessible from outside, completely tubed and electrically wired, material: PV, Novoprene, condensate outlet: DN 4/6

Straight GL Adapter, GL18 - DN4/6
Part No.: 09F9500

Product features

  • Straight GL adapter for flexible tube
  • GL connection: for use with GL 18 nut and GL 18 - 8 mm sealing ring
  • Connection for flexible tube: DN 4/6
  • Corrosion-resistant
  • High level of gas tightness
  • Material of sample-contacting parts: PVDF

Straight GL Adapter, GL18 - DN6/8
Part No.: 09F9510

Product features

  • Straight GL adapter for flexible tube
  • GL connection: for use with GL 18/14 nut with larger bore hole and GL 18 - 8 mm sealing ring
  • Connection for flexible tube: DN 6/8
  • Corrosion-resistant
  • High level of gas tightness
  • Material of sample-contacting parts: PVDF

Straight GL Adapter, GL25 - DN4/6
Part No.: 09F9520

Product features

  • Straight GL adapter for flexible tube
  • GL connection: for use with GL 25 nut and GL 25 - 12 mm sealing ring
  • Connection for flexible tube: DN 4/6
  • Corrosion-resistant
  • High level of gas tightness
  • Material of sample-contacting parts: PVDF

Straight GL Adapter, GL25 - DN6/8
Part No.: 09F9525

Product features

  • Straight GL adapter for flexible tube
  • GL connection: for use with GL 25 nut and GL 25 - 12 mm sealing ring
  • Connection for flexible tube: DN 6/8
  • Corrosion-resistant
  • High level of gas tightness
  • Material of sample-contacting parts: PVDF

Straight GL Adapter, GL25 - DN10/12
Part No.: 09F9530

Product features

  • Straight GL adapter for flexible tube
  • GL connection: for use with GL 25/18 nut with larger bore hole and GL 25 - 12 mm sealing ring
  • Connection for flexible tube: DN 10/12
  • Corrosion-resistant
  • High level of gas tightness
  • Material of sample-contacting parts: PVDF

GL Elbow Adapter PVDF, GL25 - DN4/6
Part No.: 05V6035

Product features

  • GL elbow adapter for flexible tube, 2 pieces with GL expander ring
  • For operating pressures ≥ 1 bar to 5 bar
  • GL connection: for use with GL 25 nut and GL 25 - 10 mm sealing ring
  • Connection for flexible tube: DN 4/6
  • Corrosion-resistant
  • High level of gas tightness
  • Material of sample-contacting parts: PVDF

GL Elbow Adapter PV, GL25 - DN6/8
Part No.: 05V6030

Product features

  • GL elbow adapter for flexible tube, 2 pieces with GL expander ring
  • For operating pressures ≥ 1 bar to 5 bar
  • GL connection: for use with GL 25 nut and GL 25 - 10 mm sealing ring
  • Connection for flexible tube: DN 6/8
  • Corrosion-resistant
  • High level of gas tightness
  • Material of sample-contacting parts: PVDF

Configure the product in 4 steps

Was frequently viewed

Oblique view of Compressor Gas Cooler ECL/2

Compressor Gas Cooler ECL/2

02K4000X

  • Explosion-proof
    • No
  • Cooling
    • Compressor
  • Temperature
    • > 2 °C [> 28.4 °F]
  • Gas paths
    • 2
  • Flow rate/gas path
    • > 150 Nl/h
  • Material
    • Selectable
  • Power supply
    • 220‒240 V
Oblique view of Universal Filter FT-2T, liquid alarm sensor LA1S and Electronic Controller LA1.1

Universal Filter FT-2T incl. LA1S + Electronic Controller LA1.1

02F4000

  • Type
    • Universal
  • Housing material
    • PTFE/glass
  • Filter material
    • PTFE
  • Condensate outlet
    • Yes
  • Power supply
    • 110‒120 V,
    • 220‒240 V
Oblique view of Bellows Pump MP-F10

Bellows Pump MP-F10

05P1005

  • Type
    • Bellows
  • Explosion-proof
    • No
  • Heating
    • No
  • Flow rate
    • > 300 Nl/h
  • Material
    • PTFE
  • Power supply
    • 220‒240 V