Electronic Controller FA-1.4

Part No.: 02E7110

Product features

  • Electronic controller for optical flow alarm sensor series FA and liquid alarm sensor type KS3
  • 3 operating modes
  • Automatic control of the LED brightness inside the optical flow alarm sensor
  • With line-break monitoring
  • Rail-mounting housing with LEDs for displaying operational and fault status
  • With 1 potential-free change-over contact in "safety-first" design
  • Power consumption: 1 VA
  • Power: 230 V

Product information & downloads

Manual
Data sheet
CE Certificate
Unit calculator

Barometric adjustment of the operating altitude of O₂ analyzers without pressure compensation

Enter the planned operating altitude in the field. Set the analyzer to the calculated O2 vol% value at 1013 mbar (altitude = 0 m) in air to measure at the planned operating altitude without barometric error.

Result: 22,9378 [vol%] need to be set to measure at the planned altitude without barometric error.*

*Air with standard pressure 1013 mbar = 20.93 vol% O₂

Pressure drop and delay time

Enter your values in fields 1 to 3.

1

2

3

Result: 3,39 Delay time approx. in [s]*

* Single change of gas, for 90 % response time approx. 3 changes of sample volume are required.

Calculation of the pressureless 100 % H₂O saturation

Enter the required H₂O dew point (°C).
The calculation only provides sufficiently accurate values in the temperature range between -20 °C and +90 °C.

Pressure units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Temperature units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Length units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Area units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Volume units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Weight units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Energy units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Flow rate

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Flow velocity

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Performance units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

  • Overview

    Electronic controller for connecting the pre-amplifier K-FA-H, wall mounting, rail mounting or 19 European standard pc board, power: 115 V 50/60 Hz, 230 V 50/60 HZ, 24 V DC or 24 V AC"

  • Applications
    The M&C electronic controllers FA-1.1 and FA-1.4 are used in combination with the pre-amplifier K-FA-H for flow monitoring.
  • Description
    Electronic controller type FA‑1.4, rail‑mount enclosure (22 mm wide), fault and operation indicator, for front operation, power: 230 V AC

Options & spare parts
Electronic Controller FA-1.4

Here you get an overview of suitable options & spare parts

Spare parts

Spare parts
Electronic Controller FA-1.4

Configure the product in 4 steps

Was frequently viewed