Self-Regulating Sample Line 3/50-6EX

Part No.: 01B6360EX

Product features

  • Self-regulating, electrically heated sample line
  • Approval according to ATEX for mounting in explosion zones 1, 2, 21 and 22
  • Ex approved self-limiting heater band
  • Sold by the meter for on-site assembly or optionally factory-assembled according to your specifications
  • Inner tube is non-replaceable
  • Holding temperature at -20 °C [-4 °F] ambient temperature: +50 °C [+122 °F], temperature class T3
  • Max. length allowed for -20 °C [-4 °F] ambient temperature: 65 m
  • Available up to a length of 99 m
  • Inner tube made of PTFE with Ø DN 6/8
  • Outer jacket is a black corrugated PA hose
  • Operating pressure: max. 3 bar g
  • Electrical connection: for on-site assembly the heater band needs to be connected to an Ex terminal box, for factory assembly a 1 m long heater band is connected to an Ex e terminal box
  • Power: 230 V, 115 V available as option
  • Optionally: factory assembly, accessories for on-site assembly

Certifications

Product information & downloads

Unit calculator

Barometric adjustment of the operating altitude of O₂ analyzers without pressure compensation

Enter the planned operating altitude in the field. Set the analyzer to the calculated O2 vol% value at 1013 mbar (altitude = 0 m) in air to measure at the planned operating altitude without barometric error.

Result: 22,9378 [vol%] need to be set to measure at the planned altitude without barometric error.*

*Air with standard pressure 1013 mbar = 20.93 vol% O₂

Pressure drop and delay time

Enter your values in fields 1 to 3.

1

2

3

Result: 3,39 Delay time approx. in [s]*

* Single change of gas, for 90 % response time approx. 3 changes of sample volume are required.

Calculation of the pressureless 100 % H₂O saturation

Enter the required H₂O dew point (° C).
The calculation only provides sufficiently accurate values in the temperature range between -20 °C and +90 °C.

Pressure units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Temperature units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Length units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Area units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Volume units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Weight units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Energy units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Flow rate

Enter a value to be converted in the corresponding field. All other fields will immediately show the converted value.

Flow velocity

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Performance units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

  • Description
    Self‑regulating, electrically heated sample line type 3/50‑6Ex, ATEX certified version zone 1 areas with the marking: II 2 G Ex e II T3 / II 2D tD A21, protection class IP65 TX, inner liner: non‑replaceable PTFE tube DN 6/8 and outer jacket: corrugated PA hose, power: 230 V/50 Hz, power consumption: 36 W/m at +10 °C, holding temperature: +50 °C at ambient ‑20 °C, price per meter

Configure the product in 4 steps

Was frequently viewed

Gas Sample Probe SP2000-H

20S2000

  • Explosion-proof
    • No
  • Heating
    • Yes
  • Temperature
    • 180 °C [356 °F]
  • Filter surface
    • Medium
  • Shut off/blowback
    • No
  • Calibration
    • No
  • Portable
    • No
  • Power supply
    • 220‒240 V
  • Material
    • Stainless steel

Compressor Gas Cooler ECL/2

02K4000X

  • Explosion-proof
    • No
  • Cooling
    • Compressor
  • Temperature
    • > 2 °C [> 28.4 °F]
  • Gas paths
    • 2
  • Flow rate/gas path
    • > 150 Nl/h
  • Material
    • Selectable
  • Power supply
    • 220‒240 V