3/2 Solenoid Valve MV3/2-H, heated

Part No.: 03V2000A

Product features

  • Temperature-controlled 3/2-way solenoid valve
  • Heated up to max. +180 °C [+356 °F]
  • Control thermostat with high-temperature limiter and low-temperature alarm contact
  • With thermally insulated cover
  • On a heat-decoupled mounting plate for wall mounting
  • With heated connection fittings to prevent cold bridges
  • Power supply for solenoid valve: 24 V DC
  • Power supply for heating: 115 V
  • Material of sample-contacting parts: stainless steel, FFKM, FKM

Product information & downloads

Manual
Data sheet
Unit calculator

Barometric adjustment of the operating altitude of O₂ analyzers without pressure compensation

Enter the planned operating altitude in the field. Set the analyzer to the calculated O2 vol% value at 1013 mbar (altitude = 0 m) in air to measure at the planned operating altitude without barometric error.

Result: 22,9378 [vol%] need to be set to measure at the planned altitude without barometric error.*

*Air with standard pressure 1013 mbar = 20.93 vol% O₂

Pressure drop and delay time

Enter your values in fields 1 to 3.

1

2

3

Result: 3,39 Delay time approx. in [s]*

* Single change of gas, for 90 % response time approx. 3 changes of sample volume are required.

Calculation of the pressureless 100 % H₂O saturation

Enter the required H₂O dew point (°C).
The calculation only provides sufficiently accurate values in the temperature range between -20 °C and +90 °C.

Pressure units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Temperature units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Length units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Area units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Volume units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Weight units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Energy units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Flow rate

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Flow velocity

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Performance units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

  • Applications
    In analytical technology, problems of cold bridges associated with undesired temperatures below the dew point must always be avoided. In order to ensure this, the temperature-controlled M&C three-way valves V3/2-H and MV3/2 H are used for shutting off or switching over sample gases test gases up to an operating temperature of 180 °C.
  • Description
    Electrically heated 3/2‑way solenoid valve type MV 3/2‑H, mounted on a base plate with insulated cover, electrical heating from 0 to 180 °C, adjustable via the integrated thermostat, high‑temperature limiter with reset key responding at +30 °C above Tset and low‑temperature alarm with potential‑free contact output at ‑30 °C below Tset, power supply of the heating: 115 V/60 Hz, 350 W, solenoid valve: 24 V DC, 15 W

Options & spare parts
3/2 Solenoid Valve MV3/2-H, heated

Here you get an overview of suitable options & spare parts

Spare parts

Spare parts
3/2 Solenoid Valve MV3/2-H, heated

Configure the product in 4 steps

Was frequently viewed