Heated Sample Line PSP4M4/6

Part No.: 01B4036

Product features

  • Electrically heated sample line for portable gas sample probe PSP4000-H
  • Completely assembled according to your specifications
  • Replaceable inner tube made of PTFE with Ø DN 4/6
  • Operating temperature: max. +200 °C [+392 °F]
  • Available up to a length of 14 m (sold by the meter)
  • Outer jacket: nylon braiding
  • Power: 230 V supplied by temperature controller inside the portable gas conditioning unit PSS®, 115 V available as option
  • Optionally: connection fitting type I with 1.5 m electrical cable including 7 pin-plug and additional power connection for PSP4000-H, end fitting type K with 0.5 m electrical cable including 7 pin-plug and female connector for portable gas conditioning unit PSS®, aluminium-framed case for PSP4000-H and a max. 5 m long electrically heated sample line

Product information & downloads

Manual
Data sheet
CE Certificate
Unit calculator

Barometric adjustment of the operating altitude of O₂ analyzers without pressure compensation

Enter the planned operating altitude in the field. Set the analyzer to the calculated O2 vol% value at 1013 mbar (altitude = 0 m) in air to measure at the planned operating altitude without barometric error.

Result: 22,9378 [vol%] need to be set to measure at the planned altitude without barometric error.*

*Air with standard pressure 1013 mbar = 20.93 vol% O₂

Pressure drop and delay time

Enter your values in fields 1 to 3.

1

2

3

Result: 3,39 Delay time approx. in [s]*

* Single change of gas, for 90 % response time approx. 3 changes of sample volume are required.

Calculation of the pressureless 100 % H₂O saturation

Enter the required H₂O dew point (°C).
The calculation only provides sufficiently accurate values in the temperature range between -20 °C and +90 °C.

Pressure units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Temperature units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Length units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Area units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Volume units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Weight units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Energy units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Flow rate

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Flow velocity

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Performance units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

  • Applications
    The electrically heated, plug-in M&C sample lines of the series PSP 4M4/6 are used in portable gas analysis systems. They prevent a distortion of measured values and ensure anti-freeze protection during the transport of sample gas from the sample point to the gas conditioning system or directly to the heated analyzer (above dew point).
  • Description
    Electrically heated sample line type PSP4M4/6 with replaceable PTFE tube DN 4/6, stainless steel tube stub adapted to the probe, max. temperature: 200 °C, 230 V/50 Hz, price per meter
  • Product features
    Type Regulated heating
    Explosion-proof No
    Temperature 200 °C [392 °F]
    Replaceable Yes
    Diameter DN 4/6
    Material PTFE
    Installation Portable

Options & spare parts
Heated Sample Line PSP4M4/6

Here you get an overview of suitable options & spare parts

Product options
Spare parts

Spare parts
Heated Sample Line PSP4M4/6

Options
Heated Sample Line PSP4M4/6

Configure the product in 4 steps

Was frequently viewed

Oblique view of Gas Sample Probe SP2000-H and weather protective cover

Gas Sample Probe SP2000-H

20S2000

  • Explosion-proof
    • No
  • Heating
    • Yes
  • Temperature
    • 180 °C [356 °F]
  • Filter surface
    • Medium
  • Shutoff/blowback
    • No
  • Calibration
    • No
  • Portable
    • No
  • Power supply
    • 220‒240 V
  • Material
    • Stainless steel
Oblique view of Compressor Gas Cooler ECL/2

Compressor Gas Cooler ECL/2

02K4000X

  • Explosion-proof
    • No
  • Cooling
    • Compressor
  • Temperature
    • > 2 °C [> 28.4 °F]
  • Gas paths
    • 2
  • Flow rate/gas path
    • > 150 Nl/h
  • Material
    • Selectable
  • Power supply
    • 220‒240 V